Product Info.



Mad Dog Stocks was conceived from the love of air gunning, shooting sports and created by Doug (Mad Dog) and Vanessa Russell of Wichita Kansas.  Building stocks is a passion of Doug and he made them for himself before building them for our customers.

Thanks so much for visiting our online store. Our team is excited to provide you with an impeccable online shopping experience and remains available to assist at any time. If you have questions, comments or concerns about your order or the content found within this website, please feel free to contact us via telephone or email and one of our experienced team members will get back to you right away.  Again, thanks for visiting our store and we look forward to serving you in the future.   We would also like to thank our service men and women who protect our freedoms of this great nation.  Doug & Vanessa Russell, Owner members.  

All of our stocks are poplar, we use poplar for its light weight and once it is coated it is very stable.  The coating is epoxy bed liner with three initial coats a sand down to a smooth surface with no flaws.  A final three coats are added to the stock with fine steel wool sand to final finish.  The total dry time is four days minimum after final coats.

 (Bench Rest and Ranger stocks are laminated with a hard maple center)

Warranty & Repairs:

 · If your stock is damaged or needs refinished in any way don’t worry it can be repaired to look like new again.  We will do repairs for free if the damage is not catastrophic or will walk you thru the process to repair it.

 · If you would like us to repair it for you, the shipping is on you.  You will pay for the shipping to us and for us to return it back to you plus $15.00.

  • All stocks are custom made for the customer.  There will be a 15% restocking fee on all stocks if they are cancelled before they ship.  No Returns after stocks have been shipped.

 Mad Dog AirForce Stocks:

·   All stocks have a barrel change out holes for removing barrels without removing the stock and a guide hole for handle screw alignment.

·  Maddog AirForce Stocks are supplied with a safety plate, washers, forearm screw, 4" handle screw & Instructions.

Short Stocks

  All short stocks (full & half’s) will fit Talon Frames and will also fit any Condor or Talon SS, five inches to end of frame.  The Talon’s one inch from frame end.

 (Short stocks will fit All AirForce frames)

Long Stock:

 Will fit the Condor and Talon SS to one inch from front of frame. (Will not fit Talon Frame)

Will fit all AirForce frames, Condor and up.

Marauder Stocks:

 ·  No parts are required for this stock.

·  Trigger guard, screws and forearm screw will come off your factory stock to your Maddog Stock.

·  All marauder stocks have a extra large pad and instructions for installing stock on your rifle.

You can always contact us for any information you may need at [email protected] or call us at (316) 640-3554.

Thank you,

MadDog Custom Rifle Stocks, LLC

(MadDog) Doug Russell

Benjamin Marauder Stock

 We had a lot of interest in MadDog Stocks, LLC to  build some M-Rod Stocks, with the help of (Bulls eye) Bill Lavelle, master stock builder and maker of the frame extender.  Bill is a stock builder and designer of the Shark stock, we made some changes to the stock but it is the same basic design.  The high comb is what we wanted with a thumb hole and to get the weight way down.  We now have several stocks for the Marauder but only for the Gen1.

 (Gen2 stocks coming soon)

AirForce Stocks

 AirForce makes a great air rifle with things we really like and dislike.  One of the things I do not like on the stock configuration is the grip and forearm, so I started designing some half stock prototypes.  One thing led to another and the first full stock was developed.  I wanted to lower the center site line of the rifle to lower the scope, and the full stocks do just that.  All of the stocks help stabilize the rifles and eliminate any flex.

Half stocks are great for rifles to keep as breakdowns, angle adapters and large bottles etc.  The stocks still eliminate flex around breach area.

All stocks are 99% waterproof.

Full stocks keep all contact off the rifle except the trigger and cheek. Improve P.O.I (point of impact) a great deal with a much lower sight line as well. Stability, ergonomics and consistency are also greatly improved. Something else we wanted, was to keep them very light, but strong, stable and easy to repair or change if we need too.