20 MOA Picatinny Rail Adapter
This is a Rail Adapter that we have all needed and wanted for the Air Force platform!
- 3/8" – 11mm x Picatinny or Weaver
- 20 MOA Built-in
- 10 Screws (hardened)
- Black Hard Anodized
- Made in the USA
- Length: 7.5"
- Weight: 0.5 lbs.
Mounting instructions: Screw heads will need to be on the right side of the rifle, from the rear of the rifle.
I wanted 3 things in my Mad Dog design:
- Enough length and 10 screws to stabilize the frame over the breech
- Full Picatinny for a more stable ring set (Wider stance) and to accept our Night Vision setups
- 20 MOA built-in to extend the range with standard rings. This equates to roughly 20" at 100 yards
This is a rock-solid setup made in the USA by an AR parts machinist resulting in a rail stiffens the top of the frame while providing a rigid gripping area for the rings.
We could not do this by ourselves, so we teamed up with David Williams (www.hunterssupply.com) to get them manufactured in the USA. This provides us with quality control and consistency throughout the manufacturing process.
Please let me know if you have any questions on the rail or its setup.
Free Priority Mail Shipping